分板机其实也就是PCB分板机，电子产品制造业经常需要用到分板机来代替传统的人工折板方式提高生产效率和产品质量，今天，捷力分板机厂家小编为您讲解下分板机的维护与保养方法。

In fact, the board dividing machine is also the PCB board dividing machine. The electronic product manufacturing industry often needs to use the dividing machine to replace the traditional manual folding method to improve the production efficiency and product quality. Today, Jieli board machine manufacturer's small editor will explain the maintenance and maintenance methods of the sub board machine for you.

1 定期（1个月）备份切割程序。 

Back up the cutting program regularly (1 month).

2 定期（1个月）梳理编程文件并备份，确保编程文件与产品的一致性，以方便调用。 

Regularly (1 month) comb and backup the programming files to ensure the consistency between the programming files and the products, so as to facilitate the call.

3 定期（至少1次/周）用吸尘器清理台面和电控箱内粉尘，切忌使用空压气管吹。

Regularly (at least once a week) use a vacuum cleaner to clean the dust on the table and the electric control box. Do not use air compressed air pipe for blowing

4 定期（1个月）用无尘布清洁丝杆，并用毛刷给丝杆和滑轨涂抹润滑膏脂（如滑轨生锈，建议使用1000#的砂纸配合清洗剂做除锈处理，清洁干净后再均匀涂 抹膏脂）。 

Regularly (one month) clean the screw rod with a dust-free cloth, and apply grease to the screw rod and slide rail with a brush (if the sliding rail is rusty, it is recommended to use 1000 ᦇ sandpaper combined with cleaning agent for rust removal, and then evenly apply grease after cleaning).

5 定期（1个月）检查控制箱内各接线端子及各传感器装置是否有松动。 

Regularly (1 month) check whether the wiring terminals and sensor devices in the control box are loose.

6 定期（1个月）检查压缩空气管是否存在气管脱落、破裂或漏气现象。 

Regularly (1 month) check whether the compressed air pipe falls off, breaks or leaks.

7 机器使用过程中的维护工作相当简单，只需保持机器本身清洁，并定期对上下刀片、上下挡板涂抹防锈油即可。 

The maintenance of the machine in use is quite simple, just keep the machine clean and apply anti rust oil to the upper and lower blades and upper and lower baffles regularly.

8 应当指定专人负责操作和维护，为保证机器精度，请勿在温度过高或过低的地方使用或保存。

Special personnel should be assigned to be responsible for operation and maintenance. In order to ensure the accuracy of the machine, please do not use or store it in the place where the temperature is too high or too low.