走刀式分板机有哪些使用方法：
What are the use methods of the knife type plate splitter
1、开机前确定电源电压AC220V。
Confirm the power supply voltage AC220V before starting
2、打开设备电源开关ON的位置。
Turn on the device power switch on.
3、行程设定共有五个0、100、200、300、400根据要分的板材选择合适的行程。
There are five stroke settings: 0, 100, 200, 300 and 400. Select the appropriate travel according to the plate to be divided.
4、根据板材的厚度来调整切刀的上下高度。根据速度选择键：超快速、快速、中速、慢速四种来选择设备的运行速度。
Adjust the height of the cutter according to the thickness of the plate. According to the speed selection key: ultra fast, fast, medium speed, slow four to select the running speed of the equipment.
5、调整平台的高度，确保放置PCBA板时为水平放置。
Adjust the height of the platform to ensure that the PCBA board is placed horizontally.
6、分板时PCBA的边缘凹槽要卡在分板机的下切刀位置，双手扶稳PCBA，用脚轻踩踏板，直到切刀走到设定的距离自动停止。
When dividing the board, the edge groove of PCBA should be stuck in the position of the lower cutter of the dividing machine. Hold the PCBA with both hands, and step on the pedal gently with your foot until the cutter reaches the set distance and stops automatically.