自动在线V槽分板机型“V”槽分板机对分板质量有更進一步的提高；可实现V槽X,Y双方向自动分切，对分切铝基板（300-1500MM)、铜基板、FR4、玻纤板分裁干净无毛刺，分板机可以接驳流水线实现全自动分板无需人工放板；分切好的板经流水动运走大大节省人力，完全实现无人化分板作业。变换产品时直接换取刀模部分无需人工去慢慢调刀大大节省时间。
The automatic on-line V-slot dividing machine can further improve the quality of V-slot, and can realize the V-slot X-slot, Y two direction automatic cutting, cutting aluminum substrate (300-1500mm), copper substrate, FR4, fiberglass board is clean without burr. The board splitter can be connected to the assembly line to realize automatic plate separation without manual plate placement. The sliced plate is transported by flow, which greatly saves manpower and completely realizes humanized plate splitting operation. When changing the products, it is not necessary to adjust the tool slowly and save time.
    1、设备用于单组多刀自动分板，根据不同产品制作不同的模。且更换产品方便快捷。
The equipment is used for single group multi knife automatic plate division, and different dies are made according to different products. And the replacement of products is convenient and fast.
    2、电气控制部分可在人机界面选择即可实现，方便开启或屏蔽；
The electrical control part can be selected in the man-machine interface, which is convenient to open or shield;
    3、有人机界面，台面上采用光幕形式及亚克力罩，确保安全
It has man-machine interface, light curtain and acrylic cover are used on the table to ensure safety
    4、分板刀模下面有集尘托盘（可以根据客户要求加装吸尘装置）
There is a dust collecting tray under the parting die (dust collection device can be installed according to customer requirements)
    5、整体采用落地式结构，设备适用于所有带V槽的拼板
The whole body adopts floor type structure, and the equipment is suitable for all panel with V groove
    6、分切长度：长度小于400的V槽拼板，分切厚度：0.5～3.5 MM，分切拼板宽度6-240ＭＭ
Slitting length: V-slot panel with length less than 400, cutting thickness: 0.5-3.5 mm, cutting width: 6-240mm
    7、分切材质：纤维板、铝基板、铜基板
Cutting materials: fiberboard, aluminum substrate, copper substrate
    8、刀模精度： +0.1MM，刀模寿命：50万次以上
The accuracy of the die is + 0.1mm, and the service life of the die is more than 500000 times
    9、数据监控系统：开机时间监控，产能监控，设备故障信息及自动排异系统等.
Data monitoring system: startup time monitoring, capacity monitoring, equipment fault information and automatic rejection system
    10、分板工作方式：采用送板机或直接吸盘对接流水线，将PCBA送入或吸入分板模上，装模后通过设定的程式路线，按PCBA拼板的V槽走完。分切完后通过吸盘装产品和费料边同时吸走。费料边到费料框上送入，产品送入流水线上的盘子内送走。循环作业完全实现无人化生产。
Working mode: the PCBA is fed or sucked into the parting die by using a feeder or a direct sucker docking assembly line. After the die is installed, the PCBA is completed according to the V-groove of PCBA panel assembly through the set program route. After slitting, the product is loaded with suction cup and the waste material edge is sucked away at the same time. The waste material is sent to the waste material frame, and the product is sent to the plate on the assembly line. The cycle operation completely realizes unmanned production.
   手推式PCB分板机介绍  
Introduction of hand push PCB splitter
   1.手动分板机，不是自动分板机和气动分板机，它所采用的动力不依靠电动和气动，仅仅依靠人力。一般手推式PCB分板机都会采用走刀式轻量化规划，所以其在实际生产中操作起来非常安全和简便。
Manual splitter is not automatic and pneumatic. Its power does not rely on electric and pneumatic, but only depends on human power. Generally, the hand push type PCB splitter will adopt the tool feeding lightweight planning, so it is very safe and easy to operate in the actual production.
   2.手推式PCB分板机一般适用于V-CUT槽的SMD器件PCB板，相对传统手掰分板方式，手推式PCB分板机在在整个的分切板的过程中，可以使板材不动，利用圆刀的滑移，手控直刀滑移速度，可调校V槽导向装置高低，实现零件跨越V槽，快捷地适应不同厚度的基板，将切板识所产生的內应力降低，从而可以确保基板上的电子元件因为滑移的原因而导致锡裂等损坏。
Hand push PCB splitter is generally suitable for SMD PCB with V-CUT slot. Compared with the traditional manual breaking method, the manual PCB splitter can keep the board still in the whole process of cutting board. It can adjust the V-groove guiding device height by using the sliding of round knife and manual control of straight knife sliding speed, so as to realize parts across V-slot, quickly adapt to different thickness of substrate, and recognize the production of cutting board The internal stress is reduced, so as to ensure that the electronic components on the substrate are damaged due to the slip.
   3.另外，手推式PCB分板机是以手推式进行PCB的分板，不需要使用马达，这样就不会产生静电振动和粉尘噪音等，而且一般手推式PCB分板机都比较小巧，可以节省工作空间，同时由于是手动操作，不需要电源，在优化环境和节省能源的同时还能精确控制PCB分板的精度，尤其是小型高精度的PCB板分割。
In addition, the manual PCB splitter uses the hand push type to divide the PCB, and does not need to use the motor, so it will not produce static vibration and dust noise. Moreover, the general hand push PCB splitter is relatively small, which can save working space. At the same time, because it is manual operation, it does not need power supply. It can optimize the environment and save energy, and can accurately control the accuracy of PCB board, In particular, small high-precision PCB board segmentation.